B. REMOVE SHIPPING STRAP
Removing the shipping strap is
necessary for smooth operation,
If the shipping strap is not removed, the washer will make
excessive noise.
To prevent floor damage, set washer onto
cardboard before moving across floor.
Move washer close to its final location.
STEP 1. Read, then remove the label over the electrical plug and shipping strap.
STEP 2. Pull the yellow shipping strap
completely out of the washer. There should be three cotter pins on the end of the shipping strap when it is pulled out of the washer. The electrical plug is attached to this shipping strap.
STEP 3. Pull firmly to remove the end of the shipping strap that remains pinned to the back of the washer. This
will release the rear
\ PULL
Electrical plug
ipplng s rap
Pin
STEP 4. Cut the shipping strap about 16 inches from plug end. Look for the words "CUT HERE;' Discard end with
three cotter pins. Slide remainder of
shipping strap from the electrical plug. You will use this to secure the drain hose.
I3
