SETTING YOUR CYCLE

SELECTOR (TIMER) CONTROL

Use this control to choose the agitation time and to start the washer.

For heavy soil and sturdy fabrics, use the full time.

For light soil and delicate fabrics, use less time.

PERMANENT PRESS

The PERMANENT PRESS Cycle includes a load cooling process

that reduces wrinkling compared to other cycles.

You can select up to 10 minutes of wash time.

NOTE: When the timer reaches PAUSE, the washer will drain and pause for no more than two minutes while some of

the wash water is drained and replaced with rinse water.

ULTRA CLEAN

Use this cycle for most loads to get between 4 and 14 minutes of wash time.

PREWASH

Use this cycle to get up to 4 minutes

of agitation to help remove heavy soils and stains that need pretreatment. PREWASH Cycle should be followed by an ULTRA CLEAN or PERMANENT PRESS Cycle with additional detergent.

SOAK

SOAK Cycle features 4 minutes of agitation followed by an unlimited soak time to help remove heavy soils and

stains that need pretreatment. You will need to reset the washer to a SPIN

setting to remove water. SOAK Cycle should be followed by an ULTRA CLEAN,

PERMANENT PRESS, or PREWASH Cycle with additional detergent.

NOTE: We do not recommend hot water for soaking. It may set some stains.

 

RINSE

 

SPIN

 

2ND RINSE

SHORT

6

ULTRA CLEAN 1{

OFF

lo

SUPER

PERMANENT

 

PRESS

PREWASH 4

PUSH & TURN CLOCKWISE

TO SET

PULL TO START

PUSH TO STOP

23

Page 23
Image 23
Kenmore 3950144 Setting Your Cycle Selector Timer Control, Permanent Press Cycle includes a load cooling process, Prewash