Kenmore 415.165059 manual 5xl

Burner and Firebox and Control Knobs

Place burner assembly into firebox. Fasten the burner assembly to the firebox using 5x15 fiber washers and #10-24xl/2" machine screws (A).

iInside firebox, insert heat diffuser supports with 5x15 fiber washers to firebox through sides of firebox, then secure with #10-24 flange nuts on outside of firebox (A).

Place firebox on cart. Make sure burner tubes are correctly engaged with valves. If burner is not level from left to right, adjust the two screws attaching valve to control panel. Attach ignitor wire to ignitor ( B ).

iiAttach firebox with #10-24x2" machine screws, 5x15 fiber washers and #10-24 flange nuts ( C ). Push control knobs onto valve stems ( C ).

A Burner assembly

Firebox

j"

#10-24	5xl 5
Flange Nut	Fiber Washer
Qty. 8	Qty.10

#10-24Xl/2"	Heat diffuser Support
Machine Screw	Qty.4
Qty.6

\	Heat diffuser
	support
@\	Heat shield
	for Tank

Valve...........

Make sure the burner tubes are located

underneath Heat Shield

Control Knob

C

18,464722309 °464722509