INSTALLATION
Pick a location wh_h wi_l allow you to blow the cold air into the area you want, Windows used for installation must be strong enough to support the weight of the air conditioner_ Gcod installation with special attention to the proper position of the unit wilt tessen the chance that service wi_tbe needed,
When cooling more than one room, instalta_on location is very important. To coo! your morns, cold sir must be blown from the sir conditioner in a
straight path.
HOW TO INSTALL
if the air conditioner is blacked by a storm window frame, see step 19 o_npage 8 befo_e bsglnnlng to install
_]1 Flemove the screws which fasten the cabinet at both sides and at the back. Save side screws. Discard b_ck screws.
pS_ide the unit out of the _abit'ratby gdpping the ass pan handle and pull forward while bracing the
cabinet.
FiG. 4
_Cut the FOAM SEAL {iTEM 1)to fit the underside of the window st,sh, Pee_ off the backing and attach the FOAM SEAL as shown in Fig. 5.
FIG, 5
Dinsert the side curtain {ITEM A) into the upper guide and towsr guide of the air cond_oner, Fasten the curtains to the unit w_h screws (tTEM E},
ITEM5" RG. 6
_Open the window. Mark a line on cen_er of the
window inner sill,
Carefuliy place the cabinet on the window tuner sill and align the center of cabinet front with the center line marked in the window inner sill,
DPulI the bottom window sash down behin_ the upper g_ide until they meet.
NOTE: Do not pull the window sash down so tightly that the movement of side curla_n is restricted=
F_G. 8
_ Loosely assemble the silt supports using the parts in FIG, 9,
_TEMB
ITEMC
FIG. 9
