To insert and eject a floppy disk

When the OmniBook is reading or writing data to the floppy drive, the floppy disk indicator appears on the Status Panel.

Caution

Do not insert or remove a floppy disk while the OmniBook is actively reading or writing data. Wait until the floppy drive is done. Otherwise, you could lose data or the OmniBook could stop responding.

∙Hold the disk with its face up, then slide it into the floppy drive slot until it clicks into place.

∙To remove the floppy disk, press the eject button.

To install the CD-ROM drive

1.Important

Save your work—you’ll be resetting the OmniBook.

2.If necessary, remove the floppy drive or high-capacity battery from the OmniBook.

3.Slide the CD-ROM drive into the OmniBook until it clicks into place.

4.Press the square Off button, then press the blue On/Suspend button to restart the OmniBook.

–or–

24