session at turn-on.

Off button

Off

No-power/stopped state. Everything is shut

 

 

down (battery charges if ac adapter is

 

 

connected). Computer reboots at turn-on.

 

 

 

If you plug in the ac adapter while the OmniBook is stopped, battery-charging components are activated, but the OmniBook stays in the same power state. On the other hand, if you unplug the ac adapter while the OmniBook is in the Display Off state, it changes to the Suspend state.

In addition, Advanced Power Management (APM) provides several automatic power- saving features that affect the power state. You can adjust settings in the System Configuration Utility to control features such as these:

If the OmniBook is running on battery power and there’s no activity for a short period of time, it automatically stops by changing to the Suspend state.

If you leave the OmniBook stopped in the Suspend state for a long time without plugging in the ac adapter, it automatically saves power by changing to the Hibernate state. Your session is saved.

To reset and restart the OmniBook

If Windows or the OmniBook gets stuck and stops responding (and you can’t get around this in Windows), you can reset the OmniBook and restart Windows.

1.If possible, shut down Windows.

2.Press Ctrl+Alt+Del to reboot the OmniBook. –or–

Press the square Off button on the left side of the case for 2 seconds, then press the blue On/Suspend button.

–or–

Insert a straightened paperclip into the small hole below the ac adapter socket and press the reset button inside the hole.

3.Optional: When the OmniBook displays a list of configurations, press SPACEBAR to stop the 5-second time-out. Then press a number key and ENTER to select a particular configuration. If you do nothing, the OmniBook uses its default configuration.

20

Page 20
Image 20
HP 2000/5700 manual To reset and restart the OmniBook