Kenmore 580.76100 manual Removal from Window, If AIR Conditioner is Blocked by Storm Window FP,ME

_ FRONT INSTALLATION

Instali the front grille(packed separately) onto. f_e cabinet as follows:

•Hook upper tabs of front grille into slots on the cabins top_ (FIG, 19}

= Push front gdlWs tips towards the cabinet in order to snap side tabs into the cabinet. {FIG. 19)

,Open the inlet grille. (FIG. 20)

,Install the ecr_t_ (ITEM E) through the front grite.

(FIG, 20>

-Close inletgrille. (FIG. 2i}

Top of wood strip should be approximately 3/4" higher than the storm wir_ow frame to help condensation to drain properly to the outside,

,Install a second wood strip (approximately 6° long by 1V2_wide and same thickness as first strip) in the

center of the outer sill _h against the back of the inner sill Screw the L brackets into this strip.

This will raise the L bracket as shown in FIG. 22.

			11F,#mlr_.
WOODSTRIPMOUNTED {38mm_
ON TOP OF INNE-3'SILL		_	_	E3__,,__
"I"	I	/ #_"'_		WINDOW
_NNER	ILBRACKET/			L FRAME

Front tnetatlatlo_ RG. 19

tl'£M-?_.
FrontInstallation	FIG, 20

Front installation

FIG. 21

_IF AIR CONDITIONER IS BLOCKED ;BY

STORM WINDOW FP,_ME

•tf storm windowpresentsinterference,_sten a 2" wide woodstripto the inner windowsillacross the full widthofthe sill Thewoodstripshouldbe thick enoughto raise the heightof the window siil so that the unit can be installedwithoutinterferencefrom the the stormwindowframe. See FtG. P2.

k I

J"=_l I ou_mE

FIG. 22

REMOVAL FROM WINDOW

•Turn offand unplug the air conditioner.

•Remove the front _Iie_ See HOW TO REMOVE THE FROI'_ GF_ILLE,Refer to page t3,

•Unscrew thesidescrews that you installedSt_,,p15.

•Slide the air conditione_outof_e cabinet.

BE CAREFUL NOT TO DROP iT, Hold onto it _im_Iythe

_,vholeway slidingit ou_:Once. removed, set it safety out of theway,

•Remove the L bracket from window frame and the sash sealfrom betweenthewir_Iows.

-Unscrew thes,idecurtains from thewindow frame. Fold thsm back to the s_es of thecabinet.

,Remove screws attaching cabinetto inner sill Be carefuI not to let cabinet fall once screws ate remo_,

•Remove cabinet from window opening.

•Piece air conditioner into cabinet. Reinsta]_sidescrews and FrontGrilie.

,Place unit _nd allassembly hardware in air conditioner s_ipping carton, and store in ck_an,dr/piece.

,Air conditionerscovered in this m_nua_pose _n excessiveweight hazard. Two or more people are needed to move and instal/the unit,

To prevent injury or strain, use proper filling and caring techniqueswhen moving unit,

=When handling the air conditioner, be carefu_to

avoid cutsf_om sharp metal fins on front and rear colts,

•Make sure air conditioner does not _il during removal.

-8-