7.Repeat step 4 through step 6 to install the right rail.

8.Position the hub in the rack. Align the hole in each mounting ear bracket with the holes in the assembled rail, nut, and column.

9.Insert a 10–32 x .625 machine screw through the mounting ear bracket, rail, nut, and column on each side of the hub (Figure 10). Tighten the screws.

Figure 10 Installing the Hub into the Rack

Installation

10.Slide the plenum shroud into the front side of the rack. Align the holes in the plenum shroud brackets with the holes in the assembled rails and outer posts.

Procedure 4: Mount the Hub into a Rack (Optional)

29