If the hub is to be connected to an FC-AL adapter that is connected to another FC-AL device, follow the removal procedures in the document that came with the FC-AL device before disconnecting the device’s cable.
If the hub is to be connected to an FC-AL device that is connected directly to a server, follow the removal procedures in the document that came with the FC-AL device before disconnecting the device’s cable.
When installing model L10 long-wave hubs in a cascaded topology, make sure the long-wave port is connected only to the long-wave port on another long-wave hub.
3.For the model L10 long-wave hub, connect the long-wave loopback cable to the long-wave port if the port is not in use.
4.Install any special files the FC-AL devices need. Refer to the device manual for details.
Installation
Procedure 6: Connect FC-AL Devices 39
