The Set System OID Menu appears with the new setting.

Set System OID Menu: [current = 1.3.6.1.4.1.11.2.3.7.5.10]

1. Return to Manufacturing Settings Menu

or enter new system OID suffix in dotted decimal format The suffix entered will be appended to 1.3.6.1.4.1

example: if desired system OID is 1.3.6.1.4.1.2.3.4, then enter 2.3.4

>

7.Verify that the setting is correct, then enter 1 to return to the Manufacturing Settings Menu.

Manufacturing Settings Menu:

1.Return to Main Menu

2.Set sysdescr [current = HP A3724A FC-AL Shortwave Hub]

3.Set system OID [current = 1.3.6.1.4.1.11.2.3.7.5.10]

4.Toggle port bypass persistence mode [current = Enabled]

>

If you are using Fibre Channel Manager to manage the hub, the bypass persistence setting controls the behavior of bypassed ports when the hub is power cycled or reset.

If the hub is power-cycled or reset with bypass persistence disabled, the hub automatically enables all ports that were previously bypassed in Fibre Channel Manager. If the hub is reset with bypass persistence enabled, the hub continues to bypass ports that were bypassed in Fibre Channel Manager.

8.Enter 4 to disable port bypass persistence. Verify that the port bypass persistence mode is disabled.

Manufacturing Settings Menu:

1.Return to Main Menu

2.Set sysdescr [current = HP A3724A FC-AL Shortwave Hub]

3.Set system OID [current = 1.3.6.1.4.1.11.2.3.7.5.10]

4.Toggle port bypass persistence mode [current = Disabled]

>

9.Enter 1 to return to the Main menu.

10.Exit the terminal emulator application and disconnect the serial cable from the hub and the PC.

56Updating the Hub Firmware