If a Port LED is on when no active device is attached, find the symptom that best fits the situation, then attempt the solution. When more than one solution is possible, the most likely one is listed first.
Symptom | Cause/Solution |
|
|
The cable has been | The cable is still connected to a functional device. Check |
disconnected at the device or is | the Fibre Channel mass storage device map to verify that |
connected to an inactive device, | the device is connected to the port. Also look for a Port LED |
and the Port LED is on. | that is off but should be on. Change the connections or |
| change the map as needed. |
|
|
Port LED stays on after the cable | The hub is faulty. Replace the hub. |
is disconnected from the port. |
|
|
|
Troubleshooting
If a Port LED Is On When It Should Be Off 77