HP Intrusion Prevention System S10 manual Front Panel, Model L10 Long-Wave Hub

Front Panel, Model L10 Long-Wave Hub

The front panel contains LEDs for monitoring power, fault, and port status. The long-wave port is between port 9 and the 10Base-T port. The RS-232 port is provided to configure and troubleshoot the hub and to upgrade its firmware. The 10Base-T port provides an ethernet connection if you choose to manage the hub with Fibre Channel Manager.

The Reset button resets the internal control microprocessor of the hub. Pushing the Reset button also forces loop initialization on all devices in the loop.

Figure 2 Front Panel Display, Long-Wave Hub
2	4	5	8

	1
	3			10	11
	6		7	9	12
1	Power LED	7	FC-AL long-wave port and Port LED
2	Fault LED	8	10Base-T port
3	Reset button	9	10Base-T Status LED
4	Fibre Channel connector (Port 1 indicated)	10	MAC address
5	Port LED (Port 1 indicated)	11	RS-232 port
6	FC-AL short-wave ports and Port LEDs	12	AC power connector

Product Description

Front Panel, Model L10 Long-Wave Hub 15