HP L10, Intrusion Prevention System S10 manual Front Panel, Model S10 Short-Wave Hub

Front Panel, Model S10 Short-Wave Hub

The front panel contains LEDs for monitoring power, fault, and port status. The RS-232 port is provided to configure and troubleshoot the hub and to upgrade its firmware. The 10Base-T port provides an ethernet connection if you choose to manage the hub with Fibre Channel Manager.

The Reset button resets the internal control microprocessor of the hub. Pushing the Reset button also forces loop initialization on all devices in the loop.

Figure 1 Front Panel Display, Short-Wave Hub

2 4 5 7

1

	3
		6
1	Power LED	7	10Base-T port
2	Fault LED	8	10Base-T Status LED
3	Reset button	9	MAC address
4	Fibre Channel connector (Port 1 indicated)	10	RS-232 port
5	Port LED (Port 1 indicated)	11	AC power connector

6FC-AL short-wave ports and Port LEDs

8 11

9 10

14Front Panel, Model S10 Short-Wave Hub