FreshFoodFemures
Shelves
To avoid personal injury or property damage, observe the following:
•Never attempt to adjust a shelf that is loaded with food.
•Confirm shelf is secure before placing items on shelf.
•Handle tempered glass shelves carefully. Shelves may break suddenly if nicked, scratched, or exposed to sudden temperature change.
Your refrigerator has Spillproof Glass Shelves. The Spillproof shelves have a spill retainer edge which allows for easier clean up and some are equipped with a slide out feature. To slide out, grasp the front of the shelf and pull forward. Push in the shelf to return to the original position.
To Remove a Shelf:
•Slightly tilt up the front and lift up the rear of the shelf, then pull the shelf straight out.
To Lock the Shelf into Another
Position:
•Tilt up the front edge of the shelf.
•Insert the hook into the desired frame openings and let the shelf settle into place.
•Be sure the shelf is securely locked at the rear.
The Crisper Top serves as the lower fresh food shelf.
To Remove the Crisper Top:
•Place hand under the frame to push up the glass. Lift glass out.
•Lift frame from refrigerator liner rails.
To Install:
•Replace frame in refrigerator liner rails.
•Carefully replace glass into frame.
Door Storage
Dairy Center
The Dairy Center provides convenient door storage for spreadable items such as butter
and margarine. This compartment can be moved to different locations to accommodate storage needs. To use the dairy center, raise the cover.
To Remove:
• Raise the cover, pull upward and tilt out. To Install:
•Slide the Dairy Center in and down until firmly seated in the door liner.
Door Buckets
Door Buckets can be moved to meet storage needs.
To Remove:
• Slide bucket up and pull straight out.
To Install:
•Slide bucket in and down until firmly seated in the door liner.
Adjustable Deep Tilt-Out Door Buckets
The Adjustable Deep
easy access to food items stored in the door.
To Remove Bucket:
•Tilt bucket out.
•Pull straight out of the bracket. 1"o Install Bucket:
•Tilt the front of the bucket down slightly.
•Slide into bracket and tip upright.
To Move Bucket Frame to Another Location:
•Remove bucket.
•Lift bracket up and pull straight out.
Place the bracket in a new
location.
15
