Kenmore 625.38811 Program the Timer, SET Present Time of DAY, Shows, see page 5-3 to reset

SECTION1 WATER SOFTENER START UP

C. PROGRAM THE TIMER

f

_,__ up button

f_

display/I-

down button

_,._;TRONf_ BeQhaFge Tonight

SELECT button

RECHARGE button

WATER SOFTENER

When the transformer is plugged in, a model code,

and a test number (example: $3.0) show in the face

plate display for 4 seconds. Then, 12:00 AM and

PRESENT TIME begin to flash.

53.0

button you have pressed, telling you to use another

button. For example, while setting the hardness

(step 2), the beeper sounds repeatedly when the dis- play reaches i using the DOWN button, or the high-

est hardness setting using the UP button.

_SET PRESENT TIME OF DAY

If the words PRESENT TIME do not show in the dis-

play, press the SELECTbutton (FIG. 2) until they do,

or see the previous notes.

=RESENT TIMtE j

Notes:

If SR - - shows in the display, press the UP [Zg or DOWN (_ button until SR17 is shown. Then, press the SELECT button to set, and change to the flashing

PRESENT TIME display.

To check the model code, unplug the transformer at the wall outlet and plug in again, if other than SR17

shows, see page 5-3 to reset.

SOUND "BEEPER": A "beeper" sounds while

pressing buttons for timer set-up. One beep signals

a change in the face plate display. Repeated beeps mean the timer will not accept a change from the

• Press the UP / DOWN buttons to set the present

time. Press UP to move the display ahead; press DOWN to move the time backward.

If the present time is between

noon and midnight, be sure PM shows.

If the present time is between

midnight and noon, be sure AM shows.

Each press of the UP /DOWN buttons changes

the time by one minute. Holding the buttons in

changes the time rapidly.

1-3

Problems, Questions? Call 1-800-426-9345 Kenmore Water Line