Kenmore 665.1388 manual Loading Bottom Rack, No-flip clips, To move a clip, TURBOZONE wash area

Models: 665.1388 665.1378

1 24
Download 24 pages 62.03 Kb
Page 11
Image 11
No-flip clips

3.Move the tines to the left to make room for larger dishes. Move the tines to the right to wedge plastic or other lightweight items against the side of the rack.

No-flip clips

The no-flip clips hold lightweight plastic items such as cups, lids, or bowls in place during washing.

To move a clip

1.Pull the clip up and off the tine.

2.Reposition the clip on another tine.

Loading Bottom Rack

The bottom rack is designed for plates, pans, casseroles, and utensils. Many items, up to 13" (33 cm) tall, fit in the bottom rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

Make sure pot handles and other items do not stop rotation of the spray arm(s). The spray arm(s) must move freely.

Do not load items between the bottom rack and the side of the dishwasher tub because they might block the water inlet opening.

TURBOZONE™ wash area

The TURBOZONE™ wash area is located at the back of the lower dishrack.

NOTE: You must select the TURBOZONE™ wash option to utilize this wash feature. Do not face items toward the rear of the unit if you are not using this wash option.

10 place setting

Do not load glasses, cups, or lightweight plastic items in the bottom rack. Load small items in the bottom rack only if they are secured in place.

Load plates, soup bowls, etc., between tines.

Overlap the edges of plates for large loads.

Load soup, cereal, and serving bowls in the rack in a variety of ways depending upon their size and shape. Load bowls securely between the rows of tines. Do not nest bowls because the spray will not reach all surfaces.

TURBOZONE™ wash area

Load pans, casserole dishes, etc. in the back of the lower dishrack with the soiled surfaces facing the TURBOZONE™ spray jets. Make sure items do not interfere with the water feed tube, spray arms, or TURBOZONE™ spray jets.

Tip items toward the rear of the unit between the back two rows of tines to maximize coverage.

IMPORTANT: Only one row of items may face the

TURBOZONE™ spray jets. Load items so they do not interfere with the rotation of the TURBOZONE™ spray jets. Stacking, overlapping, or nesting items will keep the TURBOZONE™ spray jets from reaching all of the surfaces.

12 place setting

 

Load cookie sheets, cake pans, and other large items at the

 

sides and back. Loading such items in front can keep the

 

water spray from reaching the detergent dispenser.

 

Secure heavily soiled cookware face down in the rack. If

 

using TURBOZONE™ wash option, load cookware in

TURBOZONE™ wash area side view

TURBOZONE™ wash area. (See “TURBOZONE™ wash area.”)

 

11

Page 11
Image 11
Kenmore 665.1388, 665.1378 manual Loading Bottom Rack, No-flip clips, To move a clip, TURBOZONE wash area