Kenmore 665.1622 Utensil basket on some models, Cup shelves on some models, To raise the top rack

The top rack is designed for cups, glasses, and smaller items. Many items, up to 11" (28 cm), fit in the top rack. (See recommended loading patterns shown.)

NOTE: The features on your dishwasher rack may vary from the drawings shown.

10 place setting

,X '¢,7 i'_

Utensil basket (on some models)

Use this extra capacity basket in the back of the top rack to hold spatulas, wooden spoons, and similar items.

Cup shelves (on some models)

Fold down the extra shelf on the left-hand or right-hand side of the top rack to hold additional cups, stemware or long items such as utensils and spatulas.

NOTE: The features on your dishwasher may vary from those shown below.

YN

12 place setting

Place items so open ends face down for cleaning and draining.

Load glasses in top rack only. The bottom rack is not designed for glasses. Damage can occur.

Place cups and glasses in the rows between tines. Placing them over the tines can lead to breakage and water spots.

China, crystal, and other delicate items must not touch each other during dishwasher operation. Damage may occur.

Load lightweight plastic items in the top rack only. Only plastic items marked "dishwasher safe" are recommended.

Load plastic items so the force of the spray does not move them during the cycle.

To avoid chipping, do not let stemware touch other items.

Small bowls, pans, and other utensils can be placed in the top rack. Load bowls in the center section for best stability.

Deluxe adjustable 2-position top rack (on some models)

You can raise or lower the top rack to fit tall items in either the top or bottom rack. Raise the top rack to accommodate items up to 9" (22 cm) in the top rack and 13" (33 cm) in the bottom rack, or lower the top rack to accommodate items up to 11" (28 cm) in both the top and bottom racks. Adjusters are located on each side of the top rack.

To raise the top rack

Lift the rack on both sides until the rack is level.

NOTE: The top rack must be level.

To lower the top rack

Depress both tabs on rack adjusters, as shown above, and slide the rack back to its original position.

9