SECTION 1
I
BEFORE INSTALLING CHECKS AND TESTS
lB. UNPACKING THE WATER FILTER
Packed with the filter are installation and owners manu-
als, an electrical transformer and a bag of several small
parts. Automatic Iron Filter models also include a feeder
valve and the other parts shown below. You will use all of
these parts while installing the filter. So you don't lose any
parts, keep in a safe place until you are ready to use
them. Remove the filter from the master carton. Discard
all cardboard and foam packing pieces.
Check the filter for shippinq damaqe. If you find damaqe,
report it toyour Sears store.
Use care when handling the filter. DO NOT turn upside
down. DO NOT drop, or set on sharp objects that could
make a hole in the bottom. The water filter is heavy and
to avoid damage, or personal injury, do not try to lift it or
move more than necessary. See page 13, when you are
ready to move it into installation position.
PARTS DESCRIPTIONS SMALL PARTS
FACE
TIMER
TOP
COVER
VALVE
ASSEMBLY _INLET-OUTLET 0CLIP
ADAPTOR(2) O
(2)
SHROUD
RESIN
TANK GROUND CLAMP
OTHER PARTS OF AUTOMATIC IRON FILTERONLY
__FEEDER VALVE
TUBING_ __ _
NUT-FERRULE (3)_1 PEROMTsT_I_UENMATIE I
BA_E
5