SECTION 4
I
STEP BY STEP GUIDES TO INSTALL
RESTART THE WATER HEATER
TURN ON THE GAS (OR ELECTRIC) SUPPLY TO THE WATER HEATER AND LIGHT THE PILOT.
NOTE:
Your new Sears filter is now filtering the water for your
household needs. However, your WATER HEATER is
filled with unfiltered water. To have fully filtered water
right away, you can drain thewater heater so it refills with
filtered water. If you don't drain it, it will take a few days
before you have fully filtered water.
Todrain the water heater, open a hot water faucet and let
it run until the water turns cold. Then close the faucet.
YOUR PLUMBING AND ELECTRICAL WORK IS COMPLETE. NOW GO TO YOUR OWNERS MANUAL AND DO THE
FILTER START UP STEPS ... setting the timer, sanitizing, etc.
18