Compaq 3200 manual 12Installing the Operating System Drivers

6-12Installing the Operating System Drivers

11.Use the Insert key to resynchronize this partition. You must resynchronize before deleting the partition. Allow INSTALL to resynchronize this partition. If warning messages indicate the selected partition contains an already-defined volume, select No (do not rename the volume) and press Esc. Since you will delete this partition, there is no reason to salvage the volume. Proceed with deleting the partition table.

12.From the INSTALL.NLM Disk Options menu, select the Partition Tables option. In the INSTALL.NLM Available Disk Drives menu, select the previously failed logical drive, which has now been repaired. The device information was recorded in Step 1. For example:

NWPA: [V503-A2-D1:0] Compaq SMART-2 Slot 8 Disk 2 NFT

Select Delete Partition. INSTALL may display several error messages.

Since you will delete this partition, do not update any Volume Definition

Table information. Continue until the partition has been deleted.

If INSTALL reports that it cannot delete the partition because another process has it locked, load MONITOR and look at the System Resources option to determine which NLM has locked the device. If it is MONITOR.NLM, you will need to unload MONITOR and any other NLMs that have the partition locked. After you create the partition and volume information, reload those NLMs.

13.Create the partition on the same logical drive.

14.Return to the Disk Options Mirroring menu. Select the previously mirrored NetWare 386 Partition number (recorded in Step 2).

NWPA: [V503-A2-D1:0] Compaq SMART-2 Slot 8 Disk 2 NFT

15.Press Insert for a list of partitions available to remirror. Select the partition associated with the repaired device (Step 1). This alerts NetWare to resynchronize the mirrored partitions.

A console message indicates successful completion of the resynchronization step.