Compaq 3200 manual Example Array Logical Configuration View with one Array

5-9

4.Click the Done button to return to the Main Configuration screen. The Logical Configuration View area should look similar to Figure 5-6.

Figure 5-6. Example Array - Logical Configuration View with one Array

5.Select the controller, then click the Create Array button to create Array B.

6.Assign both 9.1-GB drives to the array. Click the Done button.

NOTE: In this example, each array was created using drives from the same SCSI port. You can achieve better performance by selecting drives from both ports for an array, assuming you installed the correct drives in both ports before you ran the Array Configuration Utility.

Compaq Smart Array 3200 Controller Reference Guide