Compaq 3200 manual 6-39, BASEDEV=CPQARRAY.ADD /A2 /I

6-39

Ignore the specified adapter; do not control the adapter with this driver. This parameter prevents the ADD driver from recognizing the specified adapter. Use this parameter to enable another driver to control a specific adapter.

IMPORTANT: Do not ignore the primary controller or boot controller. The system will not boot.

IMPORTANT: The driver must be loaded by a BASEDEV= statement in the CONFIG.SYS file. This statement is inserted automatically by the ADDARRAY.CMD installation procedure.

Example: You are running intraNetWare on your OS/2 2.x system and you want an intraNetWare NLM to control Adapter 2 instead of the ADD driver. The following statement would prevent the ADD driver from claiming Adapter 2.

BASEDEV=CPQARRAY.ADD /A:2 /I

Compaq Smart Array 3200 Controller Reference Guide