Compaq 3200 manual I-11, POST Error Messages continued, CodeMeaning, Recommended Action, Continued

POST Error Messages continued

CodeMeaning

1792 Slot x Valid Data Found in Array Accelerator. Data automatically written to drive array.

I-11

Recommended Action

While the system was in use, power was interrupted or the system was restarted while data was in the Array Accelerator memory. Power was then restored within four days, and data in the Array Accelerator was flushed to the drive array.

1793

1794

Slot x Drive Array - Array Accelerator Battery Depleted. Data in Array Accelerator has been lost. (Error message 1794 also displays.)

Slot x Drive Array - Array Accelerator Battery Charge Low. Array Accelerator is temporarily disabled. Array Accelerator will be re-enabled when battery reaches full charge.

While the system was in use, power was interrupted while data was in the Array Accelerator memory. Power was not restored within four days, and data in the Array Accelerator was lost. Check all files for potential data corruption.

-Or-

The Array Accelerator batteries have failed.

The battery charge is below 90%. Posted writes are disabled. When the batteries are fully charged, the Array Accelerator will automatically be re-enabled and this POST message will be discontinued. Replace the Array Accelerator or the Smart Array Controller if batteries do not recharge within 36 power-on hours.

1795 Slot x Drive Array - Array Accelerator Configuration Error. Data does not correspond to this drive array. Array Accelerator is temporarily disabled.

The data stored in the Array Accelerator does not correspond to this drive array. Match the Array Accelerator to the correct drive array.

-Or-

Run the Compaq System Configuration Utility to clear data in the Array Accelerator.

Continued

Compaq Smart Array 3200 Controller Reference Guide