6-5

NetWare 3.12, 4.2, and 5.0 Driver

Installation from Novell SSD

Compaq provides an installation script on the Novell SSD that integrates Novell’s INSTALL.NLM Product Options menu option. Use this option to install or automatically upgrade Compaq storage adapter and device drivers. The drivers are copied from the Novell SSD to both the DOS server startup directory (typically C:\NWSERVER) and to the SYS:SYSTEM directory.

To install the driver for the Smart Array 3200 Controller:

1.Load INSTALL.NLM from the server console prompt.

2.Select Product Options from the Main menu.

3.Choose Install a Product Not Listed from the Other Installation Actions menu.

4.If you are installing from Novell SSD diskettes, make sure that Disk #1,

INSTALL, DOS CD SUPPORT & ADVANCED SERVER SUPPORT, is in the appropriate drive. Press Enter to confirm the location of the product (INSTALL.NLM defaults to A:\).

or

Select (or deselect) the options/products to be installed. For Compaq NWPA driver support, select the option for Compaq NWPA Storage Support. Compaq recommends that you also select the Compaq Online Configuration Utility.

NOTE: Refer to Section 1.0 of STORAGE.RDM on Novell SSD Disk 4 for a discussion of legacy DDFS versus NWPA device drivers.

5.Press F10 to accept the selected options and continue the installation or upgrade.

6.Follow the instructions on the screen to complete the installation. You will be warned that the latest intraNetWare Support Pack should be installed. If you have already performed that installation, choose to continue. Otherwise, Compaq recommends that you abort this installation and install the intraNetWare Support Pack first.

Compaq Smart Array 3200 Controller Reference Guide

Page 87
Image 87
Compaq manual Compaq Smart Array 3200 Controller Reference Guide