Compaq 3200 manual I-4 POST Error Messages, POST Error Messages continued, CodeMeaning

I-4POST Error Messages

POST Error Messages continued

CodeMeaning

1729 Slot 1 Drive Array - Disk Consistency Initialization in Progress - RAID 4/5 performance may be lower until Auto Reliability Monitoring has completed Automatic Background Parity Consistency Initialization.

1764 Slot x Drive Array - Capacity Expansion Process is Temporarily Disabled (followed by one of the following:)

1.Expansion will resume when Array Accelerator has been reattached.

2.Expansion will resume when Array Accelerator has been replaced.

3.Expansion will resume when Array Accelerator RAM allocation is successful.

4.Expansion will resume when Array Accelerator battery reaches full charge.

5.Expansion will resume when Automatic Data Recovery has been completed.

Recommended Action

This message is normal following the initial configuration of RAID 4 or RAID 5 logical drives. This POST error message will disappear and performance of the controller will improve after the parity data has been initialized by ARM (an automatic process that runs in the background on the controller).

The capacity expansion process has been temporarily disabled for the reason indicated and will resume automatically. If the array accelerator has been removed, you must reinstall it for capacity expansion to continue.

(RESUME = F1 KEY)

1765 Slot x Drive Array Option ROM Appears to Conflict with an ISA Card - ISA cards with 16- bit memory cannot be configured in memory range C0000 to DFFFF along with SMART-2/E 8-bit Option ROM due to EISA bus limitations. Please remove or reconfigure your ISA card. (RESUME = F1 KEY)

Remove or reconfigure the conflicting ISA card, referring to the directions provided with the ISA card. Alternatively, the Options ROM can be disabled on the SMART-2/E Controller with the System Configuration Utility if a SMART-2/E is not the primary (boot) controller.

continued