Microsoft Windows NT 3.51 and 4.0
This section includes instructions for installing the initial driver for a new Smart Array 3200 Controller installation or for upgrading the driver in an existing Windows NT server/Smart Array 3200 Controller system. If you used SmartStart to install Windows NT and drivers on a new server, you do not need to make the Support Software Diskette (SSD) utility diskettes. Skip this section.
NOTE: Windows NT supports using the Compaq Array Configuration Utility to reconfigure your drive arrays online. However, the first use of the Array Configuration Utility on a Windows NT server must be offline to initially set up at least one array. After that, the utility can be used online to change the array configuration.
Materials Needed
To install the Smart Array 3200 Controller Windows NT driver on your server, you will need:
■Compaq SmartStart and Support Software CD (supplied in the Smart Array 3200 Controller option kit)
■Blank diskettes
■Access to a server or workstation with a bootable
