Compaq 3200 manual Removing the Array Accelerator, 2Replacing the Array Accelerator

F-2Replacing the Array Accelerator

Removing the Array Accelerator

To remove the optional Array Accelerator from the controller board:

1.Twist the latch 1 90° to allow the standoff to pull through the controller board.

2.Carefully pull the Array Accelerator daughterboard away 2 from the Smart Array 3200 Controller board, unplugging the signal connectors.

1

2

Figure F-1. Removing Array Accelerator board from the Smart Array 3200 Array Controller

WARNING: Do not abuse, recharge, disassemble, dispose of in fire or heat above 90°C, incinerate, or expose to water or fire. Disposal of the batteries or Array Accelerator module should be accomplished within compliance of local regulations or returned to Compaq Computer Corporation by established parts-return methods.