Compaq 3200 manual SCO OpenServer, 6-25, Updating the Compaq Insight Manager Agents

6-25

Updating the Compaq Insight

Manager Agents

If you are using Compaq Insight Manager, you will need to update the Insight Agents for this monitoring utility to support the new Smart Array 3200 Controller.

If you used SmartStart 4.22 or later to install the operating system on a new Smart Array 3200 Controller installation or to upgrade your driver in an existing installation, the agents were updated by SmartStart; you will not have to manually update the agents.

If you did not use SmartStart 4.22 or later as part of your Smart Array 3200 Controller installation, you must manually update the Insight Agents. The correct agents can be obtained from your local Compaq Reseller or authorized Compaq Service Provider. Refer to the documentation included with Compaq Insight Manager for the correct procedure for updating agents.

Installation of the Smart Array 3200 Controller is now complete. Reboot the server to begin using the array controller.

SCO OpenServer 5

This section includes instructions for getting the latest driver and support information for installing the driver. If you use SmartStart to install SCO OpenServer 5 and drivers, you can skip this section; you do not need to create the Extended Feature Supplement (EFS) diskettes.

If your system has an older SCO operating system, or if you are setting up a new system with SCO OpenServer 5, Compaq recommends you use SmartStart to upgrade your operating system. SmartStart is supplied with the server or may be obtained from your local Compaq Reseller or authorized Compaq Service Provider.

Compaq Smart Array 3200 Controller Reference Guide