Compaq 3200 manual Updating the Firmware

3-6Updating the Firmware

5.If the ROM firmware for the Smart Array 3200 Controller is the same or newer than that on the Options ROMPaq diskette, you will get the message:

The ROM image files found for the device selected are not newer than the current ROM image

Press Enter to go to step 9.

or

If the ROM firmware for the Smart Array 3200 Controller is older than that on the Options ROMPaq diskette, you will get the Select An Image screen:

Device to reprogram: Current ROM revision: Select Firmware Images:

ALL COMPAQ Smart Array 3200 Controller(s) COMPAQ Smart Array 3200 Controller x.xx COMPAQ Smart Array 3200 Controller y.yy

Press Enter.

6.Review the information on the Caution screen:

Device to reprogram:	Smart Array 3200	Controller(s)
Current ROM revision:	Smart Array 3200	Controller x.xx
Selected ROM revision:	Smart Array 3200	Controller y.yy

Press Enter to reprogram the Smart Array 3200 Controller ROM or Esc to discontinue the reprogramming and return to the Select An

Image screen.

7.

Reprogramming Firmware

Indicates that the Smart Array 3200 Controller ROM is being reprogrammed. DO NOT INTERRUPT.

CAUTION: Do not interrupt this cycle. Interrupting the ROM reprogramming will leave the firmware in an unknown state. If this happens, you may not be able to reprogram the ROM and the Smart Array 3200 Controller ROM may have to be replaced. You will be notified when reprogramming is complete.