6-40Installing the Operating System Drivers

Updating the Compaq Insight

Manager Agents

If you are using Compaq Insight Manager, you will need to update the Insight Agents to support the new Smart Array 3200 Controller.

If you used SmartStart 4.22 or later to install the operating system on a new Smart Array 3200 Controller installation or to upgrade your driver in an existing installation, the agents were updated by SmartStart. You will not have to manually update the agents.

If you did not use SmartStart 4.22 or later as part of your Smart Array 3200 Controller installation, you must update the Insight Agents manually. The correct agents can be obtained from your local Compaq Reseller or authorized Compaq Service Provider. Refer to the documentation included with Compaq Insight Manager for the correct procedure for updating agents.

Installation of the Smart Array 3200 Controller is complete. Reboot the server to begin using the array controller.

Banyan VINES 6.x, 7.x, and 8.x

Use the instructions in this section to install the initial driver for a new Smart Array 3200 Controller installation or to upgrade the driver in an existing Banyan VINES 6.x, 7.x, and 8.x Server/Smart Array 3200 Controller system.

Materials Needed

To install the Banyan VINES driver for the Smart Array 3200 Controller on your server, you will need:

Compaq SmartStart and Support Software CD (supplied in the Smart Array 3200 Controller option kit)

Blank diskettes

Access to a server or workstation with a bootable CD-ROM drive. This may be the system in which you are installing the Smart Array 3200 Controller.

Page 122
Image 122
Compaq 3200 manual Banyan Vines 6.x, 7.x, 40Installing the Operating System Drivers