Compaq 3200 manual Running the System Configuration Utility

4-3

Running the System

Configuration Utility

To run the System Configuration Utility:

1.Place the Compaq SmartStart and Support Software CD in the server CD-ROM drive.

or

Place the System Configuration Utility Diskette 1 in the server floppy drive.

2.Reboot the server.

3.During the boot process, several messages appear. Among these are a notice that one or more Smart Array 3200 Controllers were detected in option slots and a recommendation to run the System Configuration Utility.

4.Press F1 to resume booting, if prompted.

5.If you are using the Compaq SmartStart and Support Software CD, select Run the System Configuration Utility from the Main Menu screen.

6.If you are given a choice of Auto Configuration, choose Yes. The system loads configuration files for all detected devices.

7.In the Configuration Complete screen, choose Review or Modify Hardware Settings.

8.At the next screen, Steps In Configuring Your Computer, select Step 3: View or Edit Details.

9.Set the Smart Array 3200 Controller(s) configuration parameters at the View Or Edit Details screen. Scroll down to the option slot for the first Smart Array 3200 Controller and edit each parameter according to the following configuration information.

Compaq Smart Array 3200 Controller Reference Guide