6-38 Installing the Operating System Drivers
3./A:[adapter index] [unit parameters]
This is a standard command line switch that causes the driver to modify its behavior toward adapters.
[adapter index] is a number used to identify a controller. The index is based on “0” for the lowest controller order number associated with the adapter controlled by this ADD. The index increases by one for each controller in the system as you move up the controller configuration order.
Example: A system that has three adapters controlled by the CPQARRAY.ADD, with the lowest configured adapter the secondary controller.
Table
Controller Index Configuration Order
Controller Order
2
3
5
Adapter Index
0
1
2
[unit parameters] This ADD only supports the /I parameter to ignore a controller. The following unit parameter is available: /I
