Compaq 3200 manual

G-7

7.Reconnect all internal and external drive cables. Pay close attention to the port numbers as noted in Step 5.

8.Turn on the server and run the Compaq System Configuration Utility. This configuration utility recognizes the Smart Array 3200 Controller and allows you to change parameters such as controller order and interrupt number, if needed. You will not see logical drive information with this utility since Smart Array 3200 Controller logical drives are configured with the Compaq Array Configuration Utility. Save the configuration and reboot the server.

You can run the Array Configuration Utility to see the configuration of your logical drive(s), look at fault-tolerance level, and so on. However, it is not necessary since your configuration information is automatically preserved.

After completing these steps, the upgrade process is complete. You can now use the Smart Array 3200 Controller.

Compaq Smart Array 3200 Controller Reference Guide