
6-2 Installing the Operating System Drivers
Novell NetWare 3.2, 4.2, and 5.0
Use the instructions in this section to install the driver for a new Smart Array 3200 Controller installation or to upgrade the driver in a server running NetWare and using the Smart Array 3200 Controller. If you use SmartStart to install NetWare and drivers, you do not need to create the Novell Support Software Diskettes (SSD). Skip to the section, “Using the Array Configuration Utility for NetWare.”
Installation Requirements
Before installing device drivers, install and load the latest support pack or operating system patch kit. Novell’s support packs and patch kits are available through the Internet. These patches correct known
Latest Drivers
The latest Novell SSD drivers may be obtained from:
World Wide Web
Go to http://www.compaq.com
Materials Needed
To install the Smart Array 3200 Controller driver on your server, you will need:
■Compaq SmartStart and Support Software CD (supplied in the Smart Array 3200 Controller option kit)
■Up to three blank diskettes
■Any server or workstation with a bootable