Channel Control
¦Configuring the Channel Menu
❑Antenna → Air / Cable
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an Air or a Cable system).
T Press the TOOLS button to display the Tools menu. You can also set the Antenna by selecting Tools → Switch to Cable (or Switch to Air).
❑Auto Program
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals
Channel
Antenna : Air ►
Auto Program
Clear Scrambled Channel
Channel List
Fine Tune
NWhen selecting the Cable TV system: Selects the cable system. STD, HRC and IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.
NAfter all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto program menu then reappears.
NIf you want to stop Auto Programming, press the ENTEREbutton. The Stop Auto Program? message will be displayed. Select Yes by pressing the ◄ or ► button, then press the ENTEREbutton.
❑Clear Scrambled Channels (digital channels only)
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30 minutes.
NTo stop searching scrambled channels: Press the ENTEREbutton to select Stop. Press the ◄ button to select Yes, then press the ENTEREbutton.
NThis function is only available in Cable mode.
❑Channel List
For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.
OYou can select these options by simply pressing the CH LIST button on the remote control.
❑Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.
NIf you do not store the
N* will appear next to the name of
NTo reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTEREbutton.
¦ Managing Channels
Using this menu, you can add / delete or set favorite channels and use the program guide for |
| |
digital broadcasts. | Added | |
All Channels | ||
Channels | ||
Shows all currently available channels. | ||
| ||
Added Channels |
| |
Shows all added channels. |
| |
Favorite | Air | |
Shows all favorite channels. |
|
OTo select the favorite channels you have set up, press the FAV.CH button on the remote control.
2 |
| Air |
|
|
4 |
| Air |
|
|
♥ TV #8 |
|
| ||
8 |
| Air |
|
|
13 |
| Air |
|
|
♥ TV #3 Alice’s Adventures in Wonderland | ||||
|
| Zoom |
| Select TTools |
|
|
| ||
