SECTION 4
I
STEP BY STEP GUIDES TO INSTALL
4B. INSTALL THREE VALVE BYPASS
1. INSTALLING THREE VALVE BYPASS AND PIPES
(FIGURE 8).
a. Cut the house main water pipe where you will connect
the filter. Loosely put together pipe, fittings and the three
valves. Place valves within easy reach.
BYPASS VALVE
3-VALVE BYPASS
(_readedplumbingshown)
IMPORTANT: WHEN LOOKING AT THE FRONT OFTHE
FILTER, THE INLET IS ON THE RIGHT SIDE. IFTHE WA-
TER IN YOUR HOUSE MAIN WATER PIPE RUNS FROM
LEFTTO RIGHT, BE SURE TO USE A "CROSS OVER" AS
SHOWN ON PAGE 9.
b. When all pipe, fittings and valves make a food fit to-
gether, tighten all threaded joints (use pipe dope on out-
side threads), or solder.
ITo
Filter
Inlet
12