Step 3. Water Fifl ,
WARNING: | To | reduce | the | risk | of | fire | Bottle \ |
| |||||||
or shock hazard, do not pour or spill |
| ||||||
water into control or motor area. |
|
| |||||
If controls get wet, let them dry |
|
| |||||
completely | and | have | unit | checked | by |
| |
authorized | service personnel | before |
| ||||
plugging | in. |
|
|
|
|
|
|
After the humidifier is positioned where it will be operating you are ready to fill the humidifier. The bottle lifts straight up and away from the base. Take care not to bump or damage fill valve assembly on the bottom of the bottle.
Invert the bottle. Press the valve stem button into the bottle and turn clockwise to lock in open position. Place bottle under the faucet. Fill the bottle, being careful not to allow any debris to get in the bottle. Debris may interfere with the valve seating. Once the bottle is full, press the valve stem button and turn counter clockwise to release and close.
CAUTION: Use only
Registered Bacteriostat available from Sears Retail store. Under no
circumstances should you use water
treatment products designed for Roto belt or Ultrasonic humidifiers.
Place the water bottle back into the humidifier base. When positioned properly, the plunger will open and the water will flow into the base. The base will hold the entire contents of the water bottle. Once the bottle is empty, remove it and repeat the filling process. The humidifier is now filled to capacity. To benefit from less frequent filling let the humidifier exhaust both the water from
the bottle and the base before filling.
z Base
PUSH iN TURN
CLOCKWISE
Spring Valve
Assembly
\
