Kenmore 790.479 manual Setting, Example 5 minutes

Setting the	Clock
Setting Continuous		Bake or 12	Hour	Energy Saving
The KITCHEN TIMER _		and FLEX	CLEAN	_	pads control the Continuous Bake or t 2 Hour Energy Saving
features. The oven	control	has a factory	preset	built-in	12 Hour Energy Saving feature that will shut off the oven if the

oven control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS

To set the control for Continuous Bake or 12 Hour

Energy Saving features

PRESSDISPLAY

1.Press and hold _.) for 7 seconds (Figure 1). After 10 seconds

"12h" or"--h" will appear in the display and the control will beep once (Figure 2).

2.	Press _	to switch between the 12 Hour Energy Saving and
	continuous bake features. Note: "12h" (Figure 2) in the display
	indicates the control is set for the 12 Hour Energy Saving mode
	and "--h" indicates the control is set for the Continuous Bake
	feature	(Figure 3).
3.	Press	to accept the change (Figure 4; display will return

Q

for 10 seconds

Figure 1

Figure 2

Figure 3

to time of day)or press__ to reject the change,or

Setting Kitchen Timer Figure 4

The KITCHEN TIMER (_o_ pad controls the Kitchen Timer feature. The Kitchen Timer serves as an extra timer in the kitchen

V

that will beep when the	set time	has run out. It does not start or stop cooking.	The Kitchen Timer	feature can be used during
any of the other oven control functions, except during a self-clean operation.			Refer to "Minumum	and Maximum Control Pad
Settings" for time amount settings.
	INSTRUCTIONS		PRESS	DISPLAY
To set the Kitchen	Timer	(example: 5 minutes)

1.Press _.,_,_. .....----will appear and "TIMER" will flash in the display

(Figure 5).					Figure 5
2. Press the number	pads to set the desired	time in the display
(example (_).	Press :::_TAR_The::. time	will begin to count	down	(_	5TART
with "5:00" and "TIMER" will stay in the display (Figure 6). Note: if

is not pressed the timer will return to the time of day after Figure 6

25 seconds.

3.When the set time has run out, "End" and "TIMER" will show in the display (Figure 7). The clock will sound with 3 beeps every 7

seconds until @ is pressed. @ Figure 7

To	cancel	the	Kitchen	Timer before the set time	has run	out
Press _.		The display will return to the time of day.
To	Set Add 1 Minute Feature
The _		ADD	t MINUTE	pad is used to set the Add t Minute feature. When			the _	pad is pressed, t minute	is added
to the Minute Timer feature				if this feature is already active,	if the Minute	Timer	feature	is not active and the _	pad is

pressed, the Minute Timer feature will become active and will begin counting down from t minute. For further information on how to set the Minute Timer feature see To Set the Minute Timer instructions above.

10