Before You Call • Sobfions to common problems
Before you carl for service, review this list. It may save you time and expense.
Problem | Solution |
|
|
|
|
|
|
|
|
|
|
|
Poor baking results. | ° Many | factors | affect | baking | results. | Maize sure | the | proper | oven rack | position | ||
| is used. Center food in the oven and space pans to allow air to circulate. | |||||||||||
| Allow the oven to preheat to the set temperature before placing food in the | |||||||||||
| oven. | Try | adjusting the | recipe's recommended | temperature or baking time. If | |||||||
| you feel | the | oven is too | hot | or cool, | see Adjusting | oven | temperature | in | |||
| Setting | Oven | Controls | section. |
|
|
|
|
|
Entire appliance does not operate.° The time of day is not set. The time of day must first be set in order to operate the oven. See Selling the clock in Setting Oven Controls section.
e
e
Maize sure power cord is plugged properly into outlet.
Electrical power outage. Check house lights to be sure. Cail your local electric company for service outage information.
*Service wiring is not complete. Call
Oven portion of appliance does not° Be sure regulator gas valve is turned to ON. See installation instructions."
operate.The time of day is not set. The time of day must first be set in order to operate the oven. See Setting clock in Setting Oven Controls section.
"Be sure the oven controls are set properly for the desired function. See Setting Oven Controls section and review instructions for the desired cooking
function in this manual or see "Entire appliance does not operate" in this checklist.
Surface burners do not ignite. | ° Surface control | knob | was not completely | turned | to | LITE. Push in & turn the | |
| surface | control | knob | to LITE until burner | ignites | and | then turn control knob to |
| desired | flame | size. |
|
|
|
|
Burner ports are clogged. With the burner OFF, use a
*Range power cord is disconnected from outlet (electric ignition models only). Be sure power cord is securely plugged into the power outlet.
*Electrical power outage. Burners may be lit manually. See section on Setting Surface Controls.
Surface burner flame only part way | • Burner | slots | or ports | are | clogged. With the surface burner OFF, clean ports |
around burner cap. | with a | wire | or needle. | ||
| * Moisture is present after cleaning. Lightly fan the flame and allow burner to | ||||
| operate | until | flame | is full. |
Surface burner flame is orange.
*Dust particles in main gas line. Allow the burner to operate a few minutes
until flame turns blue. In coastal areas, a slightly orange flame is unavoidable due to salt content in air.
Oven light does not work (on some models),
*Be sure the oven light is secure in the socket. Also see Replacing oven light in Care & Cleaning section.
18