Kenmore 790.7050 Safety Instructions, Grounding Instructions, Conversion to L.P.Gas, iNSTRUCTiONS

		Important	Safety Instructions
iMPORTANT	iNSTRUCTiONS	FOR CLEANING	See the INSTALLATION INSTRUCTIONS packaged with this
YOUR RANGE			range for complete installation and grounding instructions.

Before manually cleaning any part of the range, be sure aii controls are turned OFF and the range is COOL. The range may be hot and can cause burns.

*Clean the range regularly to keep all parts free of grease that could catch fire. Pay particular attention to the area around each surface burner. Do not allow grease to accumulate.

*Kitchen cleaners and aerosols m Always follow the manufacturer's recommended directions for use. Be aware that excess residue from cleaners and aerosols may ignite causing damage and injury.

*Clean ventilating hoods frequently m Grease should not be allowed to accumulate on the hood or filter. Follow the manufacturer's instructions for cleaning hoods.

Grounding Instructions

Avoid fire hazard or electrlcal shock. DO NOT use an adapter plug, an extension cord, or remove

grounding prong from electrlcal power cord. Failure to

follow this warning can cause serious injury, fire or death.

This appliance is equipped with a 3-prong grounding plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. DO NOT cut or remove the grounding prong from this plug.

For personal safety, the range must be properly grounded. For maximum safety, the power cord must be plugged into an electrical outlet that is correctly polarized and properly grounded.

If a 2-prong waft receptacle is the only available outlet, it is the personal responsibility of the consumer to have it replaced with a properly grounded 3-prong wail receptacle installed by a qualified electrician.

Power supply cord with 3-prong grounding plug.

Conversion to L.P.Gas

Personal inju_ or death from electrlcal shock may occur if the range is not installed by a

qualified installer or electrician.

Any additions, changes or conversions required in order for this appliance to satisfactorily meet the application needs must be made by a qualified technician.

This appliance allows for conversion to Liquefied Petroleum

(L.P.) Gas.

If L.P. conversion is needed, contact your local L.P. Gas provider for assistance. The L.P. conversion kit is provided with this appliance and is located on the lower REAR (back side) panel of the range. Before installing the kit be sure to follow the L.P. Installation Instructions carefully.