Self= Cleaning

*Setting Flex Clean

*Setting Delay Flex Clean

 

INSTRUCTIONS

PRESS

DISPLAY

1.

The time of day, "HOT",

"DOOR LOCKED" and "CLEAN" icon

 

 

will remain in the display (See Fig. 7).

 

 

2.

Once the oven has cooled down for approximately

1 HOUR, and

 

 

the "DOOR LOCKED"

icon is no longer displayed,

the oven

 

door can then be opened.

Fig.7

Stopping or Interrupting a Self-Cleaning cycle:

If it becomes necessary to stop or interrupt a Self-Cleaning cycle due to excessive smoke or fire in the oven:

1.

PressQ.

HOUR and

Q

2.

Once the oven has cooled down for approximately 1

 

 

the "DOOR LOCKED" icon is no longer displayed,the

oven door

Fig.8

 

can then be opened (See Fig. 8).

 

 

iMPORTANT NOTES when using the Self-Clean feature:

1.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.

2.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see instructions for setting the control for the 24 hour time of day display mode.

34

Page 34
Image 34
Kenmore 790.7755 manual Self= Cleaning, Stopping or Interrupting a Self-Cleaning cycle