Setting Warmer Drawer Controls

Warmer Drawer & Bread Proofing Indicator Lights

Setting Warmer Drawer & Bread Proofing Controls

Warmer Drawer Food Temperature Settings

Warmer (Warm & Ready TM) Drawer & Bread Proofing Indicator Lights

The control and indicator lights for the Warmer Drawer and Bread Proofing features are located on the control panel. The indicator lights will turn ON when the control is set, and remain ON until the controls are turned OFF.

To Set the Warmer Drawer & Bread Proofing Controls:

1.Touch the O pad at the Warmer Drawer control position. The Warmer

Drawer indicator light will flash. Note: If no further pads are touched within 25 seconds the request to power the Warmer Drawer ON will clear.

2. Set the desired power level. Touch

once to turn ON the power level for HI

 

(Fig. 2) or (

to turn ON the power level for LO (Fig. 4). The Warmer Drawer

 

indicator light will glow steady indicating the Warmer Drawer is ON.

.

Each touch of the CV-'_ or C/N_ pads will decrease or increase through 6

 

power levels from HI (Fig. 2) to MED (Fig. 3) to LO (Fig. 4) and to the Bread

 

Proofing feature (Fig. 5). If the Warmer Drawer is set at the LO setting and the

 

pad is touched again the Bread Proofing feature will be turned ON (The

 

Bread Proof indicator light will glow steady indicating the Bread Proofing feature

 

in ON (See Fig. 5 & bread dough preparation instructions on this page). To return

 

to standard

Warmer Drawer settings touch

pad at least once. Note: For

 

best results, preheat the Warmer Drawer before adding the food or bread dough.

 

An empty drawer will preheat in approximately 15 minutes.

 

.

When the food or dough is ready for removal, touch the Q

pad once to turn

 

 

 

 

the Warmer Drawer or Bread Proof feature OFF. The Warmer Drawer indicator light will turn OFF.

Med

Proof

Bread

Loo

Warmer

Drawer

Fig. 1

Hio

O

MedMed

Warmer Drawer Food

Temperature Settings

Use the recommended Warmer Drawer food temperature settings table (See Fig. 6). If a particular food is not listed, start with the MED setting. If more crispness is desired, remove the lid or aluminum foil from the food.

Most foods can be kept at serving temperatures on the MED setting. When a combination of foods are to be kept warm (for instance, a meat with 2 vegetables and rolls), use the HI setting. To avoid heat loss, do not open the Warmer Drawer repeatedly while in use.

Warmer

Drawer Recommended

Food

Settings Table

 

Food Item

 

 

Setting

Bacon

 

 

HI

Hamburger

Patties

HI

Poultry

 

 

HI

Pork Chops

 

 

HI

Fried Foods

 

 

HI

Pizza

 

 

HI

Gravies

 

 

MED

Casseroles

 

 

MED

Eggs

 

 

MED

Roasts (Beef,

Pork, Lamb)

MED

Vegetables

 

 

MED

Biscuits

 

 

MED

Rolls, hard

 

 

MED

Pastries

 

 

MED

Roils (soft)

 

 

LO

Empty Dinner

Plates

LO

ProofProof

BreadBread

Lo

Lo

o

Fig. 2

HioHio

O0

MedMed

ProofProof

BreadBread

LoLo

Fig. 4

Fig. 5

Fig. 6

12

Page 12
Image 12
Kenmore 790.7755 Setting Warmer Drawer Controls, To Set the Warmer Drawer & Bread Proofing Controls, Warmer Drawer Food