Kenmore 790.9601, 790.9600 Self-Cleaning Conrd, Starting the Select Self-Clean, Start Self-Clean

Self-Cleaning	(conrd)
Starting the Select	Self-Clean	CycJe	or	a Delayed		Start Self-Clean		Cycle
For satisfactory results,	use a 2 hour	Self-Clean		cycle	for Jight soiJs		and a 3 hour	cycJe for average or a 4 hour cycle for
heavy soils. NOTE: The kitchen area		should be well ventilated				using	an open window, ventitlatJon fan or exhaust hood
during the 1st Self-Clean	cycle. This will help eliminate				the normal odors associated with the 1st Self-Clean cycle.
To Set the Controls	for a Self-Clean		Cycle		or a Delayed		Start Self=Clean		Cycle:
(Note: if you do not want to start a Delayed			Self-Clean		Cycle,	skips	steps 2 & 3.)

1.Be sure the clock shows the correct time of day.

2. Press _. The " : " in the time of day will flash.

3.Press and hold the/_ pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed.

4. Press _. " " appears in the display.

5.Press the A or V once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press V.

"2:00" appears in the display or to select a 4 hour cycle press A. "4:00" appears in the display.

As soon as the controls are set, the motor driven lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock).

6."CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled.

When the Seff-CJean CycJe is Completed:

1.The time of day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3. If "End" is in the display and the Select Clean indicator light remains ON, press _. The time of day will appear in the

display.

NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel.

Stopping or interrupting a Select Self-Cleaning Cycle if it becomes necessary to stop or interrupt a Self-Cleaning cycle:

1.Press @.

2.Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened.

3.Restart the Self-Clean cycle once all conditions have been corrected.

To avoid possible burns use care when opening the oven door after the Self-Cleaning cycle. Stand to the side of the oven when opening the door to allow hot air or steam to escape.

DO NOT force the oven door open. This can damage the automatic door locking system. Use caution and avoid possible burns when opening the door after the Self-Cleaning cycle has completed. The oven may still be VERY HOT.

17