Kenmore 790.9659 Setting Continuous Bake or 12 Hour Energy Saving, Instructions Press Display

Setting Oven Controls

•Continuous Bake or Twelve Hour Energy Saving Mode

•Timer

Setting Continuous Bake or 12 Hour Energy Saving

The TIMER _i_?oe_and FLEX CLEAN _ pads control the Continuous Bake or 12 Hour Energy Saving features. The

oven control has a factory preset built-in 12 Hour Energy Saving feature that will shut off the oven if the oven control is left

on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for Continuous Baking.

INSTRUCTIONS PRESS DISPLAY

To set the control for Continuous Bake or 12 Hour

Energy Saving features:

1. Press and hold _si_o_ for 6 seconds or until the control beeps _for6seconds

once. (Fig.l). "12h" or "- - h" will appear in the display and the control will beep once.

2.Press _c_.xnj_to switch between the 12 Hour Energy Saving and

continuous bake features. Note: "12h" (See Fig. 2) in the display indicates the control is set for 12 Hour Energy Saving

feature and "- - h" (See Fig. 3) indicates the control is set for the Continuous Bake feature.

3. Press to accept the change (See Fig. 4) display will

Fig. 1

Fig. 2

return to time of day) or press _ to reject the change.

Setting Timer Fig. 4

The TIMER _r_ pad controls the Timer feature. The Timer serves as an extra reminder in the kitchen that will beep when

v

the set time has run out. The Timer will not START or STOP the cooking process. The Timer feature may be used during any of the other oven control functions. Refer to "Minumum & Maximum Control Pad Settings" on page 18 for time amount settings.

INSTRUCTIONS PRESS DISPLAY

To set the Timer (example for 5 minutes):

1.	Press	_.	(See Fig. 5).
2.	Press	the number		pads to set the desired	time in the display	Fig. 5
	/example			PressG.> Thetimerwillbeginacount
	down. (See Fig. 6).
	Note: if _		is not pressed the timer will		return to the time of	Fig. 6

day.

3.When the set time has run out, the clock will sound with 3 long beeps every 5 seconds until _si_oer) is pressed (See Fig. 7).

To cancel the Timer before the set time has run out:

Fig. 7

Press _. The display will return to the time of day.

2O