Kenmore 790.9659 manual Setting Flex Clean Setting Delay Flex Clean

Self-Cleaning

Setting Flex Clean

Setting Delay Flex Clean

INSTRUCTIONS PRESS DISPLAY

When the Se{f-Cieancycle is done:

1.The time of day, "DOOR LOCKED" and "CLEAN" icon will remain in the display.

2.Once the oven has cooled down for approximately 1 HOUR, and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened.

Stopping	or Interrupting	a Self-Cleaning	cycle:
If it becomes necessary to stop or interrupt a Self-Cleaning cycle
due to excessive smoke or fire in the oven:
1. PressQ.			Q

2.Once the oven has cooled down for approximately 1 HOUR and

the "DOOR LOCKED" icon is no longer displayed,the oven door	Fig.7
can then be opened (See Fig. 7).

IMPORTANT NOTES when using the Self-Clean feature:

1.The Self-Clean feature will not operate whenever a radiant surface remains ON.

2.A Self-Clean cycle may be started if the appliance has the Cooktop Lockout active. A Self-Clean cycle cannot be started if Oven Lockout feature is active.

3.If a Self-Cleaning-Cycle has started but not finished and a power failure occurs, the appliance may be thoroughly cleaned. After the door unlocks and power has been restored, set for another Self-Clean cycle.

4.If your clock is set for normal 12 hour display mode the Delay Self-Clean cycle can never be set to start more than 12 hours in advance. To set for Delay Flex-Clean 12-24 hours in advance see page 19 for instructions to set the control for the 24 hour time of day display mode.

37