Kenmore 795.5108 manual When You Go On Vacation, When You Move, When You Should Set The Icemaker

Models: 795.5108 795.5107

1 33
Download 33 pages 34.99 Kb
Page 27
Image 27
WHEN YOU GO ON VACATION

WHEN YOU GO ON VACATION

If you choose to leave the refrigerator running while you are away, follow these steps to prepare your refrigerator before you leave.

1.Use up any perishables and freeze other items.

2.Empty the ice bin.

3.Turn OFF the Icemaker. NOTE: If the ambient temperature will drop below freezing, have a qualified service technician drain the water supply system (on some models) to prevent serious property damage

due to possible flooding from ruptured water lines or connections.

If you choose to unplug your refrigerator before you leave, follow these steps.

1.Remove all food from the refrigerator and empty ice bin.

2.Unplug refrigerator.

3.Clean refrigerator, wipe, and dry well.

4.Tape rubber or wood blocks to the tops of both doors to prop them open far enough for air to get in. This stops odor and mold from building up.

WHEN YOU MOVE

When you are moving your refrigerator to a new home, follow these steps to prepare it for the move.

1.Remove all food from the refrigerator and pack all frozen food in dry ice.

2.Unplug refrigerator.

3.Clean refrigerator, wipe, and dry well.

4.Empty water from the defrost pan.

5.Clean, wipe and dry thoroughly.

6.Take out all removable parts, wrap them well and tape together so they do not shift and rattle during the move. Refer to sections in Using your Refrigerator for removal instructions.

7.Depending on the model, raise the front of the refrigerator so it rolls more easily OR screw in the

leveling legs all the way so they don not scrape the floor. See the DOOR ALIGNMENT section.

8.Tape the doors shut and tape the power cord to the refrigerator cabinet.

9.If the ambient temperature will drop below freezing, have a qualified service technician drain the water supply system (on some models) to prevent serious

property damage due to possible flooding from ruptured water lines or connections.

When you get to your new home, put everything back and refer to the REFRIGERATION INSTALLATION

section for setup instructions.

WHEN YOU SHOULD SET THE ICEMAKER

POWER SWITCH TO OFF (O)

When the water supply will be shut off for several hours.

When the ice storage bin is removed for more than a minute or two.

When the refrigerator will not be used for several days.

NORMAL SOUNDS YOU MAY HEAR

The icemaker water valve will buzz as the icemaker fills with water. If the power switch is in the ON (I) position, it will buzz even if it has not yet been hooked up to water. To stop the buzzing, move the power switch to OFF (O) position.

NOTE: Keeping the power switch in the ON (I) position

before the water line is connected can damage the icemaker.

You will hear the sound of cubes dropping into the bin and water running in the pipes as the icemaker refills.

27

Page 27
Image 27
Kenmore 795.5108, 795.5107 When You Go On Vacation, When You Move, When You Should Set The Icemaker, Power Switch To Off O