LEVELING THE REFRIGERATOR DOOR
Place level on top of the refrigerator as shown below.
If your refrigerator is not level, insert a flat blade screwdriver into the grooves of the leveling legs (shown in picture below). Rotate legs clockwise to raise or counterclockwise to lower the front of the refrigerator.
Left leveling | Right leveling leg |
leg
Raise the front of the refrigerator enough so the doors close freely when opened halfway. The refrigerator should slope 1/4"(6.35 mm) to ½" (0.127 mm) from front to back.
Then level the refrigerator from side to side.
HANDLE REMOVAL
You may have to remove the door handles to move the
refrigerator through a narrow opening. See instructions below.
NOTE: To avoid damaging door surfaces when moving the
refrigerator through narrow openings, it is ALWAYS recommended to remove the doors as instructed in
the next two pages.
*Loosen the set screws with a _2" (2.38 mm) Allen wrench and remove the handle.
NOTE: If the handle mounting fasteners need to be tightened or moved, use a 1/4"(6.35 mm) Allen wrench.
Mounting fasteners
Set screw
Allen wrench
