Setting Oven Controls
Using AirGuard™ feature
Your appliance is equipped with a catalytic oven exhaust cleaner that may be turned on during any active oven cooking process. This feature helps remove smoke and eliminates 85% of the odors generated when using your oven.
The AirGuard indicator light will glow anytime the AirGuard feature is actively cleaning (See Fig. 1).
indicator
light
Fig. 1
If you wish to have this feature clean the oven exhaust
AFTER oven cooking has started, press | keypad. | |
To turn this feature off, press | keypad. |
|
Important note:
AirGuard will turn on automatically and cannot be manually turned off when Flex Clean is active.
Operating oven lights
The interior oven lights will automatically turn ON when the oven door is opened.
Press 
to turn the interior oven light ON and OFF whenever the oven door is closed.
The interior oven lights are located on the rear wall of the oven interior and are covered with a glass shield. The glass shield protects the bulb from high temperatures and should always be in place whenever the oven is in use.
To replace the interior oven lights, see Replacing oven lights in the Care & Cleaning section.
Accent light
Your appliance includes a decorative Accent light centered horizontally behind the
When the Accent light is off, the light is in automatic mode by default. This means the Accent light will turn on automatically when an oven, cooktop function or features such as the Timer have been activated. The Accent light will turn off automatically when these functions or features are no longer active.
When the Accent light is OFF, it may be manually turned ON by pressing the Accent Light keypad once. When the Accent light has been manually turned on, it will remain on until manually turned off by pressing the Accent Light keypad again.
The brightness of the Accent light may also be adjusted.
Example - To adjust Accent light brightness:
1.Press and hold the Accent Light keypad until an acceptance tone sounds (about 6 seconds).
2.The default brightness setting of 100 will appear in the display (Fig. 2).
3.Using the numeric keypads, enter any digit from 0 to 100 to change the brightness level. Entering 0 (Fig. 3) will effectively turn the Accent light OFF until the brightness level is adjusted to a higher level.
4.Press 
to save the desired brightness setting.
Fig. 2 | Fig. 3 |
Important note:
To check the brightness level after adjusting, press the Accent Light keypad once to check. If the brightness needs further adjustment repeat steps 1, 3 and 4 above.
27
