Setting Oven Controls
Adjusting oven temperature
Your appliance has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you think the oven is cooking too hot or too cool for your recipe times, you may adjust the control so the oven cooks hotter or cooler than the oven temperature displayed.
The oven temperature offset may be increased as much as +35°F (+19°C) or decreased
Example — To increase (+) or decrease
1.Press and hold Bake keypad until the control provides the 2nd audible tone (about 6 seconds).
2.Enter 2 0 using numeric keypad.
3.Press Flex Clean keypad to toggle between plus (+) if increasing temperature or minus
4.Press
to accept change.
Important notes:
•Oven temperature adjustments made will not change the Broil or Flex Clean function temperatures.
•If the temperature shows an adjustment of
•DO NOT USE oven thermometers such as those found in grocery stores to check the temperature settings inside your oven. These oven thermometers may vary as much as 20 to 40°F from actual temperatures.
•The oven temperature adjustment may be made if your oven control has been set to display °C (Celsius) temperatures. Minimum and maximum settings for Celsius are plus (+) or minus
Restoring factory default settings
When new, your appliance was set with predetermined oven control settings. Over time, the user may make changes to these default settings. The following features or functions have user options or adjustments that may have been changed from the factory default settings:
•12 or 24 hour display mode
•Continuous bake or
•Silent or audible control
•Oven temperature display (Fahrenheit or Celsius)
•Oven temperature adjustments
•All stored recipes
•Meat Probe settings
•Accent Light brightness setting
Please be aware before restoring to factory default settings that ALL of the above user settings will be restored, including any oven temperature offset and any stored recipe information.
Example — To restore to factory default settings:
1.Press and hold the 7 numeric keypad until acceptance tone sounds (about 6 seconds).
2.Press . The control will reset all user preference settings back to factory default settings.
28