Kenmore 110.C8508, C8587, C8586 Type of Load, Time, When using Air Dry, End of Cycle Signal

Models: 110.C8508

1 44
Download 44 pages 11.71 Kb
Page 17
Image 17
Air Dry

Use Modifiers to select temperatures for the Manual Cycles.

Press Temperature until the desired temperature setting glows.

Temperature modifiers cannot be used with the Auto Dry Cycles.

@HiGH

@MEDIUM HiGH

@MEDIUM

@LOW

@EX[RA LOW

@AiR DRY

C)

TEMPERATURE

[MANUAL CYCLES ONLY}

Air Dry

Use the Air Dry Modifier for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Dry.

Type of Load

 

Time*

 

 

(Minutes)

Foam rubber - pillows,

padded bras, stuffed toys

20

- 30

Plastic - Shower curtains, tablecloths

20

- 30

Rubber-backed rugs

 

40

- 50

Olefin, polypropylene,

sheer nylon

10

- 20

*Reset cycle to complete drying, if needed.

When using Air Dry

Check to see that coverings are securely stitched.

Shake and fluff pillows by hand periodically during the cycle.

Dry item completely. Foam rubber pillows are slow to dry. NOTE: Air Dry is not available with Auto Dry Cycles.

You can change Auto Dry and Manual Cycles, Options and Modifiers any time before pressing Start.

Three short tones sound if an unavailable combination is selected. The last selection will not be accepted.

Changing Cycles after pressing Start

1.Press PAUSE/CANCEL twice.

2.Select the desired cycle and options.

3.Press and hold START. The dryer starts at the beginning of the new cycle.

NOTE: If you do not press Start within 5 minutes of selecting the cycle, the dryer automatically shuts off.

Changing Options and Modifiers after pressing Start

You can change an Option or Modifier anytime before the selected Option or Modifier begins.

1.Press PAUSE/CANCEL once.

2.Select the new Option and/or Modifiers.

3.Press and hold START to continue the cycle.

NOTE: If you happen to press Pause/Cancel twice, the program clears and your dryer shuts down. Restart the selection process.

End of Cycle Signal

The End of Cycle Signal produces an audible sound when the drying cycle is finished. Promptly removing clothes at the end of the cycle reduces wrinkling.

@HIGH

LOW

@OFF

END of CYCLE SIGNAL

Press END of CYCLE SIGNAL to adjust the sound level or turn off the signal.

NOTE: When WRINKLE GUARD ® is selected and the End of

Cycle Signal is on, a tone sounds every 5 minutes until the clothes are removed, or WRINKLE GUARD ® ends.

:: :,:::

The dryer rack is shipped in place in your dryer. Remove and discard any packing material before use.

Use the TUMBLE FREETM Heated Dryer Rack for items that you do not want to tumble dry, such as sweaters. When you use the heated dryer rack, the heated air inside the dryer flows in a concentrated pattern to allow efficient and uniform drying.

Use Timed Dry to select the desired time.

NOTE: Do not use Auto Cycles with the dryer rack. To use the heated dryer rack:

Do not remove the lint screen.

1.Open dryer door.

17

Page 17
Image 17
Kenmore 110.C8508 Type of Load, Time, When using Air Dry, Changing Cycles after pressing Start, End of Cycle Signal